Why our product is the best?

Here are just a few of the reasons that you should choose Kelley Blocks...

Perfect Build

Kelley Blocks provide the perfect combination of structural soundness, flexibility of design, and ease of installation.

Amazing Variety

They come in an array of shapes, sizes, and finishes, with special end blocks textured on two sides fo an attractive finishing touch to your wall.

Custom Options

Cap blocks are also available to provide a smooth top finish. Custom pieces may also be manufactured upon request.

Kelley Block Styles

Kelley Blocks are available in four standard finishes, which are:

About Kelley Blocks

Some things you might not know about Kelley Blocks
No Footing Neccesary

No Footing Neccesary

Kelley Blocks do not necessarily require a footing. They may be set on firm ground, though they may need to be “keyed” into the ground. A footing may be required in large walls, depending on the type and condition of the soil, the specific wall size, and what type of soil the wall is retaining. In many cases, walls may be set in firm bedding. Providing a finished product that is structurally sound while alleviating the need for forms.

Designed for Easy Handeling

Designed for Easy Handeling

Standard Kelley Blocks are designed for staggered 90-degree corners, with 45-degree blocks available as well. Angled blocks can be ordered with finish facing applied either on the inside or outside of the corner. With our round blocks, we have the ability to do any curve that is desired. We can customize for your job specific needs. Kelley Blocks are designed to allow easy handling with a forklift.

Tie Back Feature

Tie Back Feature

Another key feature of Kelley Blocks is our tie back system. A cast recess in the shape of a “T” supports an optional bracket that fits flush into the top of the block. This allows the wall to be continually built, leaving a convenient and solid support embedded in the finished wall which can be attached to the deadman (anchor), or soil anchor, at any time. Additionally Kelley Blocks can be used with geo-grids to provide more flexibility in designing your project.

Standard Blocks

Standard Blocks

Our standard concrete blocks measure 4′ x 2′ x2′, consisting of nearly one half yard of concrete and weighing approximately 2000 pounds. Two grout tubes extend down through the block allowing access for structural concrete and steel reinforcement, if necessary for your project. Each grout tube is 8″ square, and spaced one foot in from each side of the block and two feet on center. As the blocks are stacked, grout tubes line up to form a column casing, an excellent receptacle for a fence or railing post.

Download a Brochure

What can you use Kelley Blocks for?

Kelley Blocks can be used for countless possibilities. Here are just a few ideas:
Building Structures

Building Structures

Kelley Blocks can be used for building structures, building enclosures & even freestanding walls.

Retaining Walls

Retaining Walls

Kelley Blocks can be used for retaining walls, detention ponds, erosion control, barriers & bulkheads.

Fence Lines & Boundaries

Fence Lines & Boundaries

Kelley blocks are perfect for creating a stunning fence line or boundary.

Completed Installs

Made with Kelley Blocks

Get in Touch

We would love to answer any questions you have

Our Mailing Address is:

P.O. Box 1908 
Milton, Washington 98354

Give us a ring

Mike Kelley 

Contact Us